Publish Time: 2022-06-08 Origin: Site
RGB LED Pixel Light point light source is used for outdoor lighting. You should have seen the buildings in the urban area at night, and some of the buildings are illuminated one by one to perform the overall brightness and color transformation, which is the point light source.
What are the physical characteristics of the RGB LED Pixel Light?
What should I pay attention to before installing the RGB LED Pixel Light?
What are the relevant parameters of RGB LED Pixel Light?
The RGB LED Pixel Light point light source is a new type of decorative light that complements linear light sources and flood lighting. LED is a light-emitting diode, which is a light-emitting device made of semiconductor homo-PN junction, hetero-PN junction, metal-semiconductor (MS) junction, and metal-insulator-semiconductor (MIS) junction. Its working principle and some electrical characteristics are the same as general crystal diodes, however, the crystal materials used are different. LEDs include different types of visible light, invisible light, lasers, etc. Visible light LEDs are common in life. The light-emitting color of the light-emitting diode depends on the material used. At present, there are various colors such as yellow, green, red, orange, blue, purple, cyan, white, and full color, which can be made into various shapes such as rectangles and circles. LED has the advantages of long life, small size and light weight, low power consumption (energy saving), low cost, low operating voltage, high luminous efficiency, extremely short luminous response time, wide operating temperature range, pure light color, and firm structure ( Impact resistance, vibration resistance), stable and reliable performance and a series of characteristics, much favored by people.
1. The first step, to install the point light source RGB LED Pixel Light on the wall, we first need to drill holes in the wall, install expansion screws, then install the point light source guardrail light, and lock it with some self-tapping screws Guardrail lights; note that the distance between each guardrail light needs to be arranged according to the customer's requirements; generally, the distance is between 1 cm and 3 cm.
2. The second step is to connect the power line and signal line of the point light source RGB LED Pixel Light to each other. Generally speaking, the power line is a two-pin plug, and the signal line is a four-pin or five-pin plug.
LED Type: DIP 8mm
LED Channels: R-G-B
Grey Scale: 16 bits,65,536
LED Quantity: 1
Beam Angle: 180-degrees
Crust Material: Polycarbonate
Waterproof Level: IP 65, Outdoor use
Working Temperature: -25 to +55 Deg
Input Voltage:12V DC
Current: 0.028 Amps
Power: 0.336 Walts
Wire Type: 20AWG,3C. UV protected
Max Lights before power injection: approx 125 Lights
Max Distance before Power Injection: approx 30 Meters
Inline power injection: via Power T& 12V power supply
RainMin offers a complete range of plug and play RGB lighting systems that can be designed to meet your customers and market in 3 easy steps ranging from a selection of different controllers with varying control and features to the wide variety of different RainMin RGB lights and accessories.